Wire Rope Specialist

Cut To Length, Any Construction, Any Termination

We supply wire rope for hoisting, slinging, pulling, restraining, and architectural work, cut to length with the end terminations you need, from stock and made to order.

Request A Quote 02380 338 286
Trusted By Industry Leaders
BAE Systems
QinetiQ
Sunseeker
Emirates
Disney Cruise Line
Holcim UK
Freightliner
ABP (Associated British Ports)
Prysmian
Serco
Biffa
Wärtsilä
Qatar Airways
Southampton FC
Tottenham Hotspur FC
EDF Energy
Wire Rope, Crane Ropes & Assemblies Made To Order

One Source For Hoist Ropes, Slings & Architectural Rigging

Wire rope does a lot of different jobs, and the right rope depends entirely on the job. We supply rope for hoisting, slinging, pulling, restraining, and architectural feature work across a range of constructions and in both fibre and steel cores, cut to length and finished with the end termination your application requires. Stock runs from 3mm up to 42mm, in constructions including 7×7, 6×19, 7×19, and 6×36, plus the 19×7 and 35×7 non-rotating ropes used where a suspended load must not spin.

Crane and hoist ropes can also be supplied in any construction and cut to length, which matters more than it used to, as changes in crane design have pushed up the demands on hoist rope performance. Our wire rope slings cover working load limits from 50kg up to 76 tonnes from stock, and assemblies are supplied with full traceability and test certificates.

What we supply:

  • Wire rope cut to length with any end termination
  • Constructions including 7x7, 6x19, 7x19, and 6x36, in fibre or steel core
  • Non-rotating 19x7 and 35x7 ropes for hoisting and crane work
  • Wire rope slings from 50kg up to 76 tonnes working load limit
  • Crane and hoist ropes in any construction
  • Stainless steel and architectural rigging wires
Wire Rope Supplier

Need Wire Rope Cut To A Specific Length Or Spec?

Tell us the construction, diameter, length, and terminations you need, and we'll quote, make up, and dispatch.

Request Quote 02380 338 286

Our Range

Wire Rope Suppliers UK

Wire Rope Slings

50kg To 76t WLL

Supplied from stock across working load limits from 50kg up to 76 tonnes, made up with the eyes and terminations your lift requires, each with full traceability and test certificates.

Crane Hoist Rope

Crane & Hoist Ropes

Any Construction

Cut to length in any construction with any end termination, including non-rotating 19x7 and 35x7 ropes built for the higher demands of modern hoisting.

Stainless & Architectural Rigging

Stainless & Architectural Rigging

Marine & Feature Work

Stainless steel rope and assemblies for marine and industrial use, and architectural rigging wires for office and residential feature work, swaged on site.

Wire Rope Manufacturer

Custom Assemblies & Bulk Spec

Made To Order

Rope assemblies made up to your specification using our swage machines and Talurit press, from one-off terminations to recurring supply, all certified.

Quality & Certification

Full Traceability Test Certificates 3mm to 42mm Fibre & Steel Core Stainless Available

Every wire rope sling and assembly we supply comes with full traceability and its own test certificate, so the rope on your job is documented from the point of manufacture. Assemblies are made using our swage machines and Talurit press, which allow us to terminate and finish rope to the exact length and configuration you need.

We work in both fibre-core and steel-core rope, across constructions chosen for the duty, from flexible multi-strand ropes to the non-rotating 19×7 and 35×7 used where a suspended load must not rotate. Stainless steel rope is also available for marine and corrosive environments, and for architectural rigging where appearance matters as much as strength.

Why Buy From SWL

Cut, Swaged & Certified To Order

Made To Length

Cut to length and terminated to your spec using our swage machines and Talurit press, so the rope arrives ready for the job rather than needing rework.

The Right Construction

From flexible 6x36 to non-rotating 35x7, in fibre or steel core, we supply the construction the duty actually needs rather than whatever is on the shelf.

The Right Construction

From flexible 6x36 to non-rotating 35x7, in fibre or steel core, we supply the construction the duty actually needs rather than whatever is on the shelf.

Traceable & Certified

Full traceability and test certificates with every sling and assembly, so the documentation stands up to inspection.

Wire Rope FAQs

What Buyers Ask Us Most

What wire rope constructions do you supply?

We stock and supply a range of constructions, including 7×7, 6×19, 7×19, and 6×36, in both fibre and steel core, plus non-rotating 19×7 and 35×7 ropes. The right one depends on the duty, so tell us the application, and we will recommend the construction.

What capacities do your wire rope slings cover?

Our wire rope slings cover working load limits from 50kg up to 76 tonnes from stock, supplied with full traceability and test certificates. For anything outside that range, ask and we will advise.

Can you cut rope to length and fit terminations?

Yes. We cut to length and fit the end termination your application needs, using our swage machines and Talurit press. Crane and hoist ropes can be supplied in any construction, cut and finished to order.

Do you supply stainless steel and architectural wire?

Yes. We supply stainless steel rope and assemblies for marine and industrial use, and architectural rigging wires for office and residential feature work where appearance matters.

Do you supply other lifting equipment as well?

Yes. Alongside wire rope and wire rope slings, we supply webbing, round, and chain slings, plus lifting and load-securing equipment. Tell us the application and we will recommend the right product.

Ready To Discuss Your Requirements?

From inspection and testing to supply and bespoke engineering, our specialists keep operations lifting safely, nationwide across the UK.

02380 338 286 Send An Enquiry